The Wellpro Group Jar is a Bi-Directional Hydraulic Jarring Assembly and is designed to operate in conjunction with the Wellpro Group Hydraulic Intensifier. The jars unique design allows for easy dependable operation with no setting or adjustment required before use in the wellbore. The hydraulic assembly allows the operator to easily...
The Wellpro Group Hydraulic Intensifier is a straight pull and push intensifier tool often referred to as an accelerator. It is designed to operate in conjunction with the Wellpro Group Hydraulic Jar. The unique design allows for easy and dependable operation. The tool stores energy until it is released and can...
The Wellpro Group I-Stroke Impact Hammer is a device used where an application requires a high impact in either an upward or downward direction. This tool features a configurable setup allowing greater flexibility. The hammer can be run as a single Up or Down or as Bi-Directional allowing impact in either...
The Wellpro Group Hydraulic Disconnect is an extremely robust torque through drop ball disconnect. The disconnect can handle straight pull, impact, jarring and torque loads without affecting the release mechanism. The disconnect facility provides a means of disconnecting by simply dropping a ball from surface and applying pressure. After disconnection a...
The Wellpro Group Hydraulic C-Plate was designed to minimise personnel exposure and allow safe and efficient make-up of tool string connections. The simple operation is completed by the use of a hydraulically operated hand pump. This allows the operator full and managed control of raising and lowering the BHA tool string. [button...
The Wellpro Group Hydraulic Tubing Anchor is a device used for anchoring bottom hole assemblies within the wellbore. It is typically run in conjunction with Wellpro Groups Hydraulic Tubing Cutter. The anchor has a high expansion ratio allowing it to be run through restrictions within the completion tubing to anchor within...
The Wellpro Group Flow Release Spear provides a method of engaging and pulling on fish, or other types of equipment, with a slick inside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots. The tool can be utilised by...
The Wellpro Group Flow Release Slick Catch Overshot provides a method of engaging and pulling on plain end fish, or other types of equipment, with a slick outside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots. The tool...
The Wellpro Group Flow Release External Pulling Tool (JDC) is a cost-effective means of engaging, latching and manipulating standard, external fishing necks. The tool can be utilised by setting down weight to engage the external fishing neck allowing the weight applied to the tool to overcome the internal spring force. If...
The Wellpro Group Dual Flapper Check Valve provides directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing. The tool consists of a two-piece housing assembly containing two removable flapper cartridges. The flappers are spring loaded in the closed position thus allowing no...